LOVI Mammafel Bottle 250 ml

The Mammafeel bottle takes into account all the feelings of a baby used to sucking, such as: ​

• Touching the mother's breast
• Warmth and velvety skin
• Familiar shape and color
• So is the softness and elasticity of the breasts

The dynamic pacifier in the Mammafeel bottle not only imitates natural closeness and sucking from the breast as much as possible, but also does not disturb the sucking reflex, so that the baby can freely return to nursing from the mother's breast.

Features:

• A baby bottle inspired by mother's breasts
• Naturalness and elasticity, a soft ring on the pacifier in the color of the areola of the nipple
• Softness and softness thanks to the matte surface on the teat
• The shape and proportions modeled after the mother's breasts ensure that the baby's mouth is positioned at the correct angle
• It does not disturb the suction reflex, thanks to the dynamic teat
• Anti-colic bottle - well-placed lips allow free breathing through the nose, which reduces the risk of colic
• The first pacifier with the unique technology of two types of silicone with different strengths

The package contains:

• A bottle
• Dynamic pacifier 0m+
• Top hat
• Container

Options - nipple flow:

• 0m+ MINI - bottle size 150ml
• 3m+ SLOW - bottle size 250ml

The innovative bottle Mammafeel

Close to mother's breast and safe for breastfeeding.

Naturalness and elasticity

The unique, flesh-colored pacifier ring naturally resembles the color and softness of the nipple areola.

Soft and velvety to the touch

The soft matte surface of the pacifier imitates the mother's skin, its texture and softness.

Shape and proportions

The wide, contoured shape, modeled after the mother's breast and the perfect proportions ensure that the baby's mouth is positioned at the right angle, the lips are tightly closed and the baby can breathe freely through the nose, which reduces the risk of colic.

Dynamics

Thanks to the dynamic soft tip and hard base, it does not disturb the suction reflex.

The proper opening angle of the child's mouth

Proper support for the baby's mouth and properly placed lips, which allows each child to suck comfortably without the mouth sliding off the surface of the pacifier.

Anticolic

The anti-colic valve on the pacifier and the correct position of the lips on the pacifier reduce the risk of colic

Safe silicone

Unique technology of two types of silicone with different hardness

Visible scale

It allows controlling the amount of milk the baby drinks.

Comfortable to hold

The correct proportions of the bottle, in addition, the bottle is matte to the touch, which makes it nice and comfortable for parents to hold.

Features:

• High quality
• Made in the EU, from European materials
• Does not contain BPA
• For children from 3 months
• It can be washed in the dishwasher
• A microwave oven can be used
• Boiling water is poured
• Disinfection in boiling water

Instructions for use (bottle)

Keep the product clean. Before the first use, disassemble and clean the product, then put the components in boiling water for 5 minutes. It is about ensuring hygiene. Thoroughly clean all parts of the bottle before each subsequent use, then sterilize it in a home steam/electric sterilizer or place it in boiling water to ensure hygiene. Wash all parts thoroughly with clean water, including areas that may not be visible but that food has passed through, to remove food residue. After each use, clean the bottle and feeding teat of liquid residues, rinse and wash with hot water. Boiling and hard water can cause deposits.

The glass can be washed in the dishwasher (max. temperature 60⁰C) in the upper basket; after washing, rinse under running water to thoroughly remove detergent residue. Inspect carefully before each use. Replace it with a new one at the first sign of damage or weakness. Remember to leave the bottle open when heating food in the microwave. Be especially careful when using the microwave; localized overheating may occur. Always stir heated food and check food temperature before feeding. Fruit juice or tea can leave stains on the teat and bottle or form limescale that does not change their properties. Do not place the product in a hot oven or heat it on an electric/gas stove.

Instructions for use (pacifier for feeding)

Before the first use, clean the product and then put it in boiling water for 5 minutes. It is about ensuring hygiene. Before each use, wash the pacifier in warm water to ensure hygiene. Special care must be taken when flushing to avoid damage to the valve. It is not recommended to wash the pacifier in the dishwasher, as detergents can damage the product. The teat can be sterilized in a microwave oven / steam sterilizer or using a sterilization capsule, which can be purchased separately with an additional bottle teat. Do not use antibacterial substances.

Before each use, check the teat for feeding and pull the teat in all directions. Especially if the baby has teeth. Discard at first signs of deterioration or weakening. Do not tighten the bottle retaining ring as this may damage the teat air valve. Always check for leaks. If liquid leaks out, unscrew the cap again and check that the teat is installed correctly. Never enlarge the flow holes on the teat as this can damage the teat. Do not leave the feeding pacifier in direct sunlight or heat, and do not leave it in a disinfectant ("sterilizing solution") for longer than recommended, as this can weaken the pacifier. It is recommended to change the pacifier max. After 2 months of use. The product is not a toy. Keep the instructions for future use. The batch code is on the packaging. For the safety and health of your child

Warning

Continuous and long-term sucking of liquids causes tooth decay. Always check the temperature of food before serving. Discard the product at the first sign of damage or wear. Keep components out of reach of children when not in use. Never connect with cords, ribbons, cords or wide parts of clothing, the child could be strangled. Never use a feeding pacifier as a regular pacifier. Use this product only under adult supervision.

Assembling the nipple for feeding

The pacifier should be placed from the top of the insole due to its unique design inspired by the mother's breast. When the teat is in place, it forms one part with the cap. The specially developed stable base of the pacifier made of a thick layer of silicone behaves like a stretched mother's breast and allows the pacifier to maintain its shape and dynamics.

After inserting the teat into the cap, care should be taken to ensure that the cap is correctly positioned on the teat and inside and that it is not twisted/bent. If necessary (visible ripples on the inside of the teat), the edge should be pressed with your finger to ensure proper sealing of the bottle. This will ensure that the vent valve will work properly and the teat will hold its shape.

Try other products of the LOVI brand, which you can find in the categories Bottles, cups, Feeding supplies and Mother and baby. If you are not sure about the choice of this product, be inspired in the category Bottles with pacifiers.