Presentation:
- unit weight 450 g;
- maximum user weight 130 kg;
- aluminum tube;
- support height 675 - 970 mm;
- adjustment of the support height 14 positions with intervals of 25 mm;
- anti-slip rigid plastic handle that can be replaced later;
- anti-slip plastic handle.

How to use:
Height adjustment
The piece for adjusting the height is extracted.
This part has a metal shaft that blocks the two sections of the crutch.
The inner section, the one with the rubber shock absorber goes inside the upper section, the one with support on the forearm. In both sections, through holes are drilled through which the shaft of the height adjustment piece is inserted.
The adjusting piece removed, the two sections slide relative to each other so that the length of the crutch increases or decreases.
When you get the desired length, insert the shaft of the adjustment part through the through holes, locking the crutch at the chosen length.
Optimum adjustment of the crutch height: the user in a vertical position with the hand extended next to the body.
The crutch in a vertical position with the shock absorber on the floor.
The support handle must come under the elbow.
The support handle of the crutch must be positioned below the elbow when the user is in a vertical position with the hand extended next to the body, and the crutch is vertical with the rubber tip on the floor.

Maintenance:
Do not use corrosive solvents or abrasive materials.
Wash with warm water and detergent using a soft sponge.
Rinse with cold water and wipe off excess water with a soft, dry cloth.
Store in a hygienic place.

Precautions:
Do not use for purposes other than those intended.
Do not use corrosive substances or abrasive materials for cleaning.
Do not exceed the maximum allowed weight.

Presentation:
1 piece